![]() |
Data-At-Rest Scan |
Using Data-At-Rest Scan, you can scan and detect any confidential data present in your endpoints and removable devices. You can scan the desired location such as; drive, folder, or removable devices on the endpoints and detect the confidential or sensitive information present. You can view the information related to the detected confidential data such as; the file path, threat type, and matched text.
Note
To perform Data-At-Rest scan, you must enable DLP on the endpoints.
To initiate scanning, follow these steps:
1. On the Status page, select the endpoints you want to scan.
2. The client action bar is enabled above the table. In the Client Actions list, select DLP.
3. In the Please Select drop down, select Start Data-At-Rest Scan.
4. Click Submit.
Start Scan dialog appears.
Click Start Scan to start the scan of the selected endpoints. The action will be initiated on the client as per set polling interval.
The selected endpoints are scanned for compliance.
You can customize the Data-At-Rest scan settings if required.
5. To customize the DAR scan settings, click Data-At-Rest Scan Settings and select one of the following:
o Quick Scan: Select this option to scan the drive on which your operating system is installed.
o Full System Scan: Select this option to scan all the drives.
o Scan Specific Folder(s): Select this option to scan a particular folder(s). To scan specific folder, follow these steps:
i. Click Configure.
ii. Enter the path of the folder that you want to scan.
iii. Click Add.
iv. You can also choose to scan the subfolders by selecting the Include Subfolder check box.
v. You can also remove a path from the list by clicking Delete.
vi. Click Apply.
6. Select Scan Priority. The Scan Priority is Normal by default. You can change the priority to Low or High, if required.
7. In the Select data to scan section, click the File Types tab.
8. Select the file types (format) that you want to scan.
9. Click the Confidential Data tab.
10. Select the Confidential Data to scan.
11. Click the User Defined Dictionaries tab and select the User Defined Dictionaries to scan.
12. Click Apply Changes.
You can reset the DAR scan settings to default with Reset button, if required.
13. Click Start Scan.
Note
● Email Notifications are not supported for Data-At-Rest Scan feature.
● Data-At-Rest Scan feature will be available only if DLP feature pack is enabled for that EPS server.
You may exclude folders for scanning.
● To exclude the folder, enter the name of the folder in the text box and click Add.
● To remove the folder from the excluded folders list, select the folder from the list and click Delete.
To stop Data-At-Rest scanning, follow these steps:
1. On the Status page, select the endpoints you want to stop Data-At-Rest scan.
2. The client action bar is enabled above the table. In the Client Actions list, select DLP.
3. In the Please Select drop down, select Stop Data-At-Rest Scan.
4. Click Submit.
The Stop command has been sent.